Products » Attachment

Sheet pile press system

Sheet piles can be installed by static pressing with the leader mounted RTG press-system. It works with a minimum of noise and vibration emission. A flexible modular clamp system enables the installation of various U and Z profiles.
 

 Modular Design:

  • 360° turnable clamps for various Z-profiles with same distance and light profiles
  • shiftable clamps for various U-profiles 
  • guide bodies for different profiles 
  • expensive "Key-Components" as clamps, cyclinder incl. guidance and the complete control unit can be used for
    all profiles
  • adaption for different profiles by changing the guide body within a short period of time and with moderate additional cost 
  Sheet pile press system

 

Technical data

Pressing force kN 4 x 800
Extraction force kN 4 x 600
Stroke of cylinder (S) mm 420
Oil flow l/min 350
Working pressure (max.) bar 350
Body for cylinder units   dependent on profiles

kg lb  

 

Dimensions

 kg lb   

H Height mm 2.625 - 2.800*
B Width mm 2.300 - 2.820*
T Depth mm 1.100 - 1.200*
A Section width mm 600 - 770*
approx. total weight kg 6.700 - 7.900*
* dependent on profiles    
 

 MPZ

 

 onepix_600px_grey

 

Technical data

Pressing force lbf 4 x 179,847
Extraction force lbf 4 x 134,885
Stroke of cylinder (S) in 16.5
Oil flow gal/min 92.5
Working pressure (max.) psi 5,076
Body for cylinder units   dependent on profiles

lb kg  

 

Dimensions

 lb kg   

H Height ft 8.6 - 9.2* 
B Width ft 7.5 - 9.2*
T Depth ft 3.6 - 3.9*
A Section width ft 1.9 - 2.5*
approx. total weight lbs 14,771 - 17,416*
* dependent on profiles    
 

 MPZ

 

 
© 2012 by BAUER Aktiengesellschaft. All rights reserved.
Imprint/Data protection   |   Sitemap